START HERE: PPE File Sharing and File Requests

Laser Cut Face Shield
#3

Hi folks,

All the files I upload will now be put into this folder:

Have a look at the requests file for info

Lets get on it cutters!

Cheers
Phill

2 Likes
#13

I just noticed Kitronic sheet is 1050x750mm.
If you chop it in 1/2 to give a 750x525 sheet, I have worked up a file which gives:
13 x headbands
14 x standoffs
14 x adjusting straps

It is quite tight on the borders, maybe too tight, but they are now in the dropbox folder too:

1 Like
#14

Hi everyone,

Great effort by everyone with the PPE. I’ve been tinkering with a design for a Tension Release Band as i have had quite a few request for these over the last few days. The design can be laser cut out of Polypropylene and it can be folded up to make it easier to store when not in use. If this is of any interest to anyone I’ve put a 2D Design and DXF format of the design into the below Google Drive Shared folder -

https://drive.google.com/drive/folders/1DQ66ehJT9JxO0pem51i_0jpW2yLyVEBG?usp=sharing

Thanks

Paul

2 Likes
#23

I tried to add some files, but hit the size limit so I threw them up on my own website if anyone wants to use them.

This is optimised for a 400x400mm bed laser cutter and based on 1020x720mm sheet of Polypropylene.

I’ve laid it out to optimise cutting paths so that no lines are double cut. And I’ve used a different colour (blue or pink) for internal bits to be cut first.

  1. Cut one 400mm wide strip, leaving a 320mm sheet.
  2. If you have passthrough, just start cutting, if not cut the parts so that you get pieces of the listed dimensions.
1 Like
#25
#27

Pops’ modified design now in dropbox, assorted formats:

#28

Trouty53’s design with dxf files:

Covid 19 laser cut face shield
#29

I have made a PDF of a sort of disclaimer. If anyone wants to steal it please do.
I have a pages version that can be edited - I’ll share if requested.

I feel much better handing out PPE with this type of disclaimer that I’m emailing to the recipients of the visors. Feedback appreciated.

(It should be located in a google drive as a pdf)

:blush:Face visors notes disclaimer

1 Like
#35

This is the minor mod I made to keep the top on reliably

Dims should be W: 221.875 H:103.942 mm (approx)

Dermot's Top with exrtra slots in end tabs

Doesn’t need any other mod as works with the existing ‘tongues’ very nicely

IMG_20200419_170717260
IMG_20200419_1707172604160×3120 478 KB

4 Likes
#38

can you send me the page version of your PDF DISCLAIMER sheet. I need to change to be used in the United States (New Jersey).

#39

This was submitted by a private person. You can ask @tim, himself if he’d like to share that with you.

#40

You probably want Alexdubarrygurr :slight_smile: We do have a disclaimer for our own.

1 Like
#41

Hi Tim…
Thanks… do you have a disclaimer I could modify. Can’t get a reply from Alexldubakrrygurr.

1 Like
#42

don’t forget to remove branding and QR etc.

1 Like
#43

Hey I replied to your Instagram post :slight_smile:
Send me your email… I can’t upload a pages version here.
However if you download the pdf in the previous comment by me then usually you can edit these in word. Depends what format you want to use.

Alex

1 Like
#44

Thank you… my e-mail is jemdur@verizon.net … if you send via word… I have 2013 … thanks JERRY

#45

Hey do you have a dxf file for the tension release band? I clicked the link but think it’s been removed. Email me Alexdubarrygurr@gmail.com. Thank you

1 Like
#46

is what you need in here?


cheers
Phill

#47

for some reason my computer doesn’t open the dxf’s…but I have a version now :slight_smile:
thanks

#48

found this useful: https://viewer.autodesk.com/

If your school uses 2d design, you are allowed to download and use the latest version while the lockdown is on: https://www.techsoft.co.uk/adverts/coronavirus-covid-19-teacher-request